induction brazing machine
model : UF-06A/AB-III
Main specifications:
Maximum input power: 6.6KW
Oscillating frequency: 500-1100KHz
Maximum input current: 30A
Input voltage: 220VAC single phases, 50 or 60Hz
Duty cycle: 100%
Cooling water: ≥0.2Mpa 2-5L/min
Auto heating time: 0.1-99.9seconds
Auto retaining time: 0.1-99.9seconds
Auto cooling time: 0.1-99.9seconds
Weight and dimension:
Model | Net weight(KG) | Size: L x W x H (mm) | Packing weight | Pacing size: L x W x H (mm) |
UF-06A-III | 25KG | 580x260x500mm | 42KG | 680x360x600mm |
UF-06AB-III generator | 18KG | 520x240x500mm | 40KG | 620x480x600mm |
UF-06AB-III heating head | 4KG | 140x93x140mm |
Main characteristics:
- With high frequency up to 1100KHZ the quenching thickness can be controlled lower than 1mm, and very thin and tiny parts can be easily heated.
- IGBT and current inverting technologies have been used; higher reliability and lower maintenace cost.
- 100% duty cycle, continuous working is allowed at maximum power output.
- Constant current or constant power status can be selected accordingly to achieve higher heating efficiency;
- Display of heating power and heating current and oscillating frequency.
- Simple to install , installation can be done by unprofessional person very easily;
- Light weight, small size;
- different shape and size of induction coil can be changed easily to heat different parts.
- Advantages of the model with timer: the power and the operating time of the heating period and the retain period can be preset respectively, to realize a simple heating curve, this model is suggested to use for batch production to improve the repeatability.
- the separated small heating head is especially suitable for the applications in which the parts are stationary and the heating head is moved to fit the place.
Main applications:
- brazing of diamond tool blades and machining tools.
- heat treatment of small parts
- Quenching of the saw tip
- Shaping of the small driller
- etc.
...