Home Advanced Wirelss WIFI 6 Mesh Router Hotrain FD1
Product Features:
Ø Cloud AC Disconnect-type
Ø Wireless High Concurrency Technology
Ø Wireless high throughput technology
Ø Wireless wide coverage technology
Ø Seamless roaming technology
Ø Agile deployment
Product specifications:
Product model | SIB-FD1 |
Weight | 300g |
Installation | Desktop |
Dimensions (excluding accessories) | 99mm x 99mm x 89mm |
Ethernet port | 10/100/1000M BASE-TX Adaptive Port *3 |
Power supply | 12V 1.5A DC |
Built-in Bluetooth | BLE5.0 |
USB interface | USB3.0 |
Antenna type | Built-in 4 high efficiency antennas |
Antenna gain (default omnidirectional antenna) | 2.4G:4dBi 5G-1:4dBi |
Working band | 802.11ax/ac/n/a : 5.725GHz-5.850GHz ; 5.15~5.35GHz (China) 802.11ax/b/g/n : 2.4GHz-2.483GHz (China) |
Wireless rate | 2.4G:2*2 11ax 573Mbps |
Wireless power | 2.4G:21.5dBm@MCS7/BW20(EVM-30dB) 5G-1: 21.5dBm@MCS9/BW80(EVM-33.5dB) |
Maximum transmission power | 2.4GHz: 21 dBm (combined power) 5 GHZ-1:21 dBm (combined power) 5 GHz-2:21 dBm (combined power) The actual transmitted power varies according to the regulations of different countries and regions |
Modulation technology | OFDM : BPSK@6/9Mbps、QPSK@12/18Mbps、16-QAM@24Mbps、64-QAM@48/54Mbps DSSS : DBPSK@1Mbps、DQPSK@2Mbps、CCK@5.5/11Mbps MIMO-OFDM (11n): MCS 0-15 MIMO-OFDM (11ac): MCS 0-9 MIMO-OFDM (11ax): MCS 0-11MIMO-OFDM (11ax): MCS 0-11 |
Modulation mode | 11b: DSS:CCK@5.5/11Mbps,DQPSK@2Mbps,DBPSK@1Mbps 11a/g:OFDM:64QAM@48/54Mbps,16QAM@24Mbps,QPSK@12/18Mbps,BPSK@6/9Mbps 11n:MIMO-OFDM:BPSK,QPSK,16QAM,64QAM 11ac/ac wave2:MIMO-OFDM:BPSK,QPSK,16QAM,64QAM,256QAM 11ax: MIMO-OFDM: BPSK,QPSK,16QAM,64QAM,256QAM,1024QAM |
Power adjustment | Automatic system adjustment |
Reset/restore factory configuration | Support hardware reset and software reset |
Status LED | Normally on mode / flashing mode / Networking abnormal indication (the indicator can be turned off by software) |
Working temperature / storage temperature | -10ºC~40ºC/-40ºC~70ºC |
Working humidity | 5%~95%(non-condensing) |
Protection grade | IP41 |
Maximum power consumption | <15W |
EMC | GB9254, EN301 489, EN55022, FCC Part 15, RSS-210 |
Certification | Meet FCC/CE/CCC/RoHS certification |
MTBF | >250000H |
Software specifications:
11ax | Working frequency band | 2.4GHz+5GHz |
A-MPDU | support | |
A-MSDU | support | |
MU-MIMO | support | |
OFDMA | support | |
Beam switching molding (TXBF) | support | |
Maximum Similarity Demodulation (MLD) | support | |
Maximum Combination Ratio Reception (MRC) | support | |
Space-Time Block Code (STBC) | support | |
Low Density Parity Checking (LDPC) | support | |
WLAN base | Maximum number of access users | 256 |
Virtual AP | 4 | |
WPAPSK/WPA2PSK/WPA3 | support | |
RTS/CTS | support | |
Multiple SSID | support | |
Unique SSID for smart devices | support | |
Wired networking | Automatic discovery and authorization networking | |
Wireless mesh networking | Automatic discovery and authorization networking | |
Automatic path switching | Support path dynamic automatic switching | |
Link fault detection and automatic recovery | support | |
Networking senior | Automatic channel adjustment of whole network | support |
Automatic bandwidth adjustment of whole network | support | |
Automatic power adjustment of whole network | support | |
Network self-management | Distributed AP ad hoc network, AP can be added or replaced as needed | |
Security Policy | Encryption | Support AES, WPA3 security encryption |
802.11i | support | |
Certification | MAC address authentication/PSK authentication | |
User isolation | 1. Layer 2 isolation of wireless users 2. Wireless user isolation based on SSID | |
Forwarding security | Support message filtering, MAC address filtering, broadcast storm suppression, etc. | |
SSID and VLAN binding | support | |
Management frame protection (802.11w) | support | |
Layer 2 and 3 functions | IP address settings | Routing mode: static IP address, DHCP to obtain an IP address or PPPoE dial-up, bridge mode |
Local forwarding | Support: local forwarding based on SSID+VLAN | |
Multicast | IGMP Snooping | |
Wireless Advanced Features | 802.11e | Support WMM |
Priority | Support Ethernet port 802.1p identification and marking Support wireless priority to wired priority mapping | |
Ai QoS | Supports application service flow identification and air interface queue mapping | |
ATF air interface resource allocation | Support ATF based on client and SSID Guest network air interface resource allocation | |
Auto channel / auto bandwidth / auto power | Support | |
Load balancing | Based on traffic/number of users/frequency band/air interface load | |
802.11k/802.11v/802.11r | Support | |
AP Steering | Support | |
Band Steering | Support | |
Automatic power adjustment/packet-by-pack power adjustment |
Support | |
Multicast enhancement | Support: Multicast to Unicast (IPv4) | |
Beamforming+ among wireless networking nodes | Support | |
Green energy saving | Packet by packet power control (PPC) | Support |
Green AP mode | Support | |
Dynamic MIMO power saving | Support | |
Enhanced Automatic Power Saving Transmission (E-APSD) | Support | |
WMM Power Save | Support | |
Installation, management and maintenance | APP+Bluetooth guided start | Support |
App local management / remote management | Support | |
Cloud AC | Support | |
Remote maintenance | Support | |
AP tracking | Support |
Shaanxi Fatego Network Technology Co., Ltd
Address: 22F/C Building, Fuerdun International Finance Center, Xi’An, China
Post code: 710000
Contact: Stone
Email: ftg_blue@163.com shiyuzhen@ihotrain.com
Phone: + 86 13319200202
Contact: Eva
Email: evaliu@ihotrain.com
Phone/Whatsapp: +86 17316608049
Contact: Maria
Email: mariama@ihotrain.com
Phone/Whatsapp: +86 15091488273