High quality oil transfer gear pump Hydraulic Gear Pump for industrial use , Variations rich
Excellent durability: the pump passed a 1 million pulse endurance test with
a surge pressure of 24.5 Mpa
Highly efficient:with a highly precise wear plate-type pressure balancing mechanism,
the pump maintains high volumetric and mechanical efficiency
Variations and compatibility:the pump supports many variations, and with mounting
dimensions the same as those of other companies, it can be used to replace an existing pump
| Pump type | Displacement | Pressure Mpa | Rotational speed | Mass | |||
| cm3/rev. | Rating | Maximum | Minimum | Rating | Maximum | kg | |
| K1P1 | 1.0 | 20.6 | 24.5 | 1300 | 1800 | 6000 | 1.58 |
| K1P2 | 2.0 | 900 | 1.63 | ||||
| K1P3 | 3.0 | 850 | 1.65 | ||||
| K1P4 | 4.0 | 800 | 5000 | 1.67 | |||
| K1P6 | 6.0 | 700 | 4000 | 1.69 | |||
| K1P7 | 7.5 | 600 | 3500 | 1.71 | |||
| K1P9 | 9.0 | 550 | 3000 | 1.73 | |||
| K1P10 | 10.5 | 500 | 2500 | 1.75 | |||
Standard specifications
Can be used in a wide range of machinery: agricultural, construction,
and industrial machinery etc.
Understanding the model number
Shape of the shaft end
Dimensional outline drawing
Performance curve
Instructions for use
1. Fitting and centering
Shaft centering accuracy
Make sure to use a flexible coupling. Adjust the shaft so that it has an eccentricity with
its counterpart shaft of within 0.2 TIR and an angle error of within ±1 degree
Fitting and positioning the pump
Make sure the mount for mounting the pump and motor is sufficiently rigid,
and fit the pump horizontally. Additionally, employ a vibration-proof structure so that
the mount's overall vibrations are absorbed as much as possible
2. Suction pressure
On the suction side (port entrance), suction pressure should be within between -0.02 and +0.03
MPa. (Upon a low temperature start with no load, it should be within -0.05 MPa).
However,a suction pipe should be selected, and kept as straight as possible to keep time short.
3. Contamination prevention
Use a suction filter between 150 (100μ) and 200 (70μ) mesh. In addition,
in order to safeguard the hydraulic apparatus, use a 20μm (nominal) return filter or such,
and remove contaminants. The level of contamination of the hydraulic fluid within
the tank must be controlled and constantly kept at NAS level 1
4. Controlling the hydraulic fluid
Hydraulic fluid
Use hydraulic fluid with an ISO viscosity of between VG32 and VG68.
The recommended viscosity is between 20 and 60 c St(mm2/s),
but a range of between 10 and 400cSt(mm2/s) can be used at times with a load
Fluid temperature
The temperature range for general use is between 0 and 80℃.
Temporary use at temperatures from -20 to +100℃ is also possible
Tests are carried out on all pumps.
Leak test and performance inspection
Detailed Company Introduction globally; and the company is working to become an enterprise that continuously enriches all of its stakeholders. as well as selling accompanying parts. machine tools manufacturers; printer manufacturers; semiconductor manufacturers; construction machine manufacturers; aircraft machine manufacturers; medical device manufacturers; university laboratories; and industrial engineering centers, etc. parts for such machinery and equipment, AGENCY ASSIST, INC. values "resources and energy" and promotes environmentally conscious business. In addition, AGENCY ASSIST, INC. built an environment management system based on the following action plan and assertively promotes sustainable environmental conservation activities. [Action Plan] ISO14001. In addition to strategic action and periodic revisions—the company seeks to encourage continuous improvement by holding reviews. etc.; aiming to lighten the impact on the environment; and working to prevent pollution. The company is implementing continuous improvements and periodic revisions based on these environmental objectives and goals. this company has agreed to. the company. |
We “Agency Assist Inc.” is specialized in trading high quality processed metals. Since our company was founded in 1990, We’ve contributed to create a market as a supplier of Japanese industrial products and technology. We’ve also aimed to spread the market to overseas and our goal is to be a top of metalworking trading company in Japan.
However, we’ve been working not only as a supplier but quality manager of products. Most of all are inspected by hand with testing tools. Depending on the products, we check over the products with some machines such as CMM, image measuring instrument and so on before sending and delivering. In other words, we always provide reliable and high quality parts to our customers. Although it takes time and effort to check a lot of products, we believe that the continued effort makes customers satisfied. Moreover, it’s been making good relationship of trust with our customers for a long time.
As you know, it’s one of the most important elements for buyers to cooperate with Japanese companies because most of them are always careful about their jobs. However, it’s hard for them that have much chance to contact with such good companies. On Alibaba, we believe that we can probably solve the problems. We will search and provide Japanese industrial products which buyers want. We will also suggest which can handle as much as possible in Japan. We “Agency Assist Inc.” will going to be the bridge between Japan and foreign countries through the Alibaba.