Model |
| Unit | JN-NV1050 |
Travel | X axis | mm(inch) | 1050(41.3) |
| Y axis | mm(inch) | 550(21.7) |
| Z axis | mm(inch) | 600(23.6) |
| Spindle nose to table | mm(inch) | 150-750(5.9-29.5) |
| Spindle centre to solid column surface | mm(inch) | 566(22.3) |
Table | Working area | mm(inch) | 1300*550(51.2*21.7) |
| Max.loading | kg | 700 |
| T-stots(No.*Widlh*Pitch) | mm(inch) | 5*18*125(5*0.8*5.0) |
Spindle | Tool shank | - | BT40(BT50) |
| Speed | rpm | 6000 |
| transmission | - | Belt(Gear)Drive |
| Bearing lubrication | - | Grease |
| Cooling system | - | Oil cooled |
| Spindle motor max.rating | kw(HP) | 15(20) |
| Axis motor max.rating(MITSUBISHI) | Kw | 2.0/3.5/3.5 |
| Axis motor max.rating(FANUC) | kw | 2.5/2.5/2.5(STD)3.0/3.0/4.0(OPT) |
Feed rates | Rapids on X/Y/Z axis | m/min | 36/36/3 |
| Max. Cutting feedrate | m/min | 20/20/20 |
Tool magazine | Tool storage capacity | pcs | 24 |
| Type of tool (optional) | type | BT40(BT50) |
| Max.tool diameter | mm(inch) | 85(3.3)arm |
| Max.tooi weight | kg | 7 |
| Max. Tool length | mm(inch) | 300(11.8)arm |
Avg.changing Time (ARM) | Tool to tool | sec. | 2.5 |
| Air source required | kg/cm² | 6 up |
Accuracy | Positioning (VDI3341) | mm(inch) | 0.01(0.0004) |
| Repeatability (VDI3341) | mm(inch) | 0.005(0.0002) |
Dimension | Machine weight(net) | kg | 7200/8000 |
| Power source required | kva | 30 |
| Shipping Floor plan(L*W*H) water tank and chip conveyor not included | mm(inch) | 2900*2500*2900(114.2*98.4*114.2) |
| Floor plan(L*W*H) | mm(inch) | 3670*2520*2870(144*99.2*112.9) |
Standard Accessories
Fanuc controller
Spindle speed 8000/10000/12000/20000 rpm(depend on machine model)
Automatic tool changer
Full splash guard
Heat exchanger for lectric cabinet
Automatic lubricating system
Spindle air blast system
Spindle oil cooler
Spindle air curtain
Spindle orientation
Coolant gun and air socket
LED light
Rigid tapping
Coolant system and tank
Cycle finish indicator and alarm lights
Note: Due to the continuous research and development of products and continuous technological innovation, the company has the right to change and the right to final interpretation, without prior notice.