Introduction
ZH-1050AC is a multi function model,suitable for card board,EB flute corrugated board,can do two fold,
four fold,and bottom lock.This model has correction device and bottom lock device.Can make electrical adjusting.Has UV destroying device and dust remove device for better gluing effect.
Machine Characters
1.Driving by synchronous belt,ensure smooth and accurate running
2.Inverter driving,stable and power saving
3.Use tooth bar adjust(for higher configuration use electric adjust),easy operate
4.Automatic continuous feeding,use multiple belt with vibrating motor,(for higher configuration use drilled suction
belt),to keep the feeding stable.
5.Special three plate prefolding as optional
6.Two upper glue device and two lower glue device ,for different kind gluing.
7.Automatic counting and kicking ,quantity can preset.
8.Conveyer pressure adjustable according to the box to ensure best quality
Technical Parmeters
Model | ZH-1050AC |
Suitable material | Card board,E /B flute corrugated board |
Feeding method | Automatic continuous feeding |
Max mechanical speed | 300m/min |
| Overall dimension | 14000*1900*1600mm |
| Weight | 7.5T |
| Power consumption | 11.5KW |
| Glue type | Solvent |
Folding Section
- Equipped with speed variator for belts,ensure the folded boxes parallel and in good order
- Fast,convenient adjustment and operation can fold boxes perfectly
- The middle up and down transmission module can fold boxes synchronously or alternately
Trombone Section
Pressure can be adjusted according to the paper thickness.For flute A,B corrugated board,overlapping and jogger
devices are equipped to ensure box gluing well.
After kicker is set up,whatever speed the machine runs ,the kicker can automatically follow,no need to reset it.
Configuration
1)Main motor:TECO Taiwan
2)Inverter:Siemens
3)Timing belt and pulley:Optibelt German
4)Bearing:NSK
5)Main axis:Taiwan chorme plated steel bar
6)Wall thickness:20mm tempered
7)Feeding belt:Habasit Switcherland
8)Transfer belt:NITTA Japan
9)Plain belt:NITTA Japan
10)Low voltage apparatus:Omron/Fuji
Optional Configuration
- High frequency Plasma
- Yaskawa servo system(for 4/6 corner box)
- HHS glue sprary system (for 4/6 corner box)
About Factory
Warranty Service:
Machines are new (or unused) and the guarantee period will be given thirteen months from shipment date. During
this period, the seller will offer free maintenance and free spare parts that caused by the machine’s quality,
but the buyer must pay the courier cost. Parts damaged because of mishandling and consumable parts are not
covered by any warranty.