Specifications
1. multifunctional ICU treatment ventilator2. Color TFT screen
3. night and day mode
4.Pneumatically driven
Aeonmed is professional anesthesia machine, ventilator manufacturer, medical pump, operating light and table manufacturer since 2001, after more than 10 years development, Aeonmed has been grow up to OR&ICU operating expert.
With owning more than 800 staffs and covering 10,000 square meters manufacturing base, Aeonmed is moving toward to be most famous hospital medical solution expert to assist hospitals fine best solution.
Our main product lines:
- Anaesthesia machine
- Transport and ICU ventilator
- Infusion pump and Syringe pump
- Operating table and lamp/light
- Ceiling pandent
- Medical solution, Hospital information and area gas system
Aeonmed is welcome your connection and communication, we believe we are the best choice for your medical solution.
Features:Microprocessor controlled, pneumatically driven electronically controlled, for adult and pediatric
8” TFT color screen
With CPAP ventilation mode
Day and night mode for improving patient’s sleep at night
Dynamic display for pressure and tidal volume
Built-in PEEP
Back-up apnea ventilation, auto-response to unexpected emergency apnea
Oxygen concentration continuously adjustable
No need for air compressor, reduce cost and noise
Specification
Modes of ventilation
Volume Controlled (VCV), Assist/Control(A/C)
Synchronized Intermittent Mandatory Ventilation (SIMV)
Pressure Support (PSV)
Spontaneous ventilation (SPONT)
Continuous Positive Airway Pressure (CPAP)
Combined: VCV + SIGH, SIMV(VCV)+PSV
Parameters
Tidal volume: 0~1500ml
Respiratory rate: 1~70bpm (VCV&PCV)
1~40bpm(SIMV)
IE ratio: 1:4, 1:3, 1:2, 2:3, 1:1, 2:1 (Used in A/C mode)
Inspiration time: 0.2~6s (SIMV mode)
Inspiratory pause time: 0.2~6s
FiO2: 21%~100%
Pressure trigger sensitivity: -2~2kPa
PEEP: 0~3kPa
P support: 0-6kPa
Pcontorl: 0.5~6kPa
Key lock: yes
Monitoring
Pressure values: Paw, PEEP, CPAP
Volume/Flow values: VT, MV
Time values: Ftotal
Oxygen monitoring: with O2 sensor (Option)
Real time curves: Pressure-Time
Alarm
MV high, MV low, Paw high, Paw low, VT high, FiO2 high, FiO2 low, Tapnea, Power supply failure, Battery low, Battery exhausted, O2 supply down
Technical data
Screen: 8.”TFT color screen
Gas supply: O2, 0.25~0.6MPa
Power supply: AC110~240V, 50Hz/60Hz, 65VA
Maximum security pressure: 8kPa
Compliance: 4mL/100Pa
Noise: 65dB(A)
Communication interfaces: RS232 port
Dimensions (H×W×D): 350×303×280 mm
Weight: 15kg
Environment requirements
Temperature: | 5°C~40°C(Operation) |
-10°C~55°C (Storage) | |
Relative humidity: | ≤80%, non-condensing(Operation) |
≤93%, non-condensing (Storage) |
Aeonmed - The Operating Expert of OR&ICU