Hydraulic chuck Adaptor Plates for automatic Gang type cnc lathe
There are three questions to answer to aid the correct choice of power chuck:
1. Type and model of CNC lathe.
2. Length of workpiece?
3. Outer diameter of workpiece?
4. Processing requirement?
Size Parameters
| Model/Spec. | Nose of Spindle D | A | H | H2 | E | Reference Drawing |
| -05A24 | A24 | 110 | 82.6 | - | 20 | fig1 |
| -06A25 | A25 | 140 | 104.8 | - | 15 | fig1 |
| -08A26 | A26 | 170 | 133.4 | - | 17 | fig1 |
| -10A28 | A28 | 220 | 171.4 | - | 18 | fig1 |
| -12A28 | A28 | 220 | 171.4 | - | 18 | fig1 |
| -15A211 | A211 | 300 | 235 | - | 22 | fig1 |
| -18A211 | A211 | 300 | 235 | - | 22 | fig1 |
| -21A215 | A215 | 380 | 300.2 | - | 27 | fig1 |
| -06A24 | A24 | 140 | 82.6 | 104.8 | 20 | fig2 |
| -08A25 | A25 | 170 | 104.8 | 133.4 | 23 | fig2 |
| -10A26 | A26 | 220 | 133.4 | 171.4 | 28 | fig2 |
| -12A26 | A26 | 220 | 133.4 | 171.4 | 28 | fig2 |
| -15A28 | A28 | 300 | 171.4 | 235 | 33 | fig2 |
| -18A28 | A28 | 300 | 171.4 | 235 | 33 | fig2 |
| -21A211 | A211 | 380 | 235 | 330.2 | 41 | fig2 |
| -05A25 | A25 | 110 | 104.8 | 82.6 | 45 | fig3 |
| -06A26 | A26 | 140 | 133.4 | 104.8 | 40 | fig3 |
| -08A28 | A28 | 170 | 171.4 | 133.4 | 45 | fig3 |
| -12A211 | A211 | 220 | 235 | 171.4 | 54 | fig3 |
It is recommended to grease chucks at least twice a day in order to maximize longevity
lathe chuck lathe chuck lathe chuck lathe chuak lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck