Grade:
Temper:
Type:
Application:
Width:
Surface Treatment:
Alloy Or Not:
Place of Origin:
Brand Name:
Model Number:
Product Name:
Color:
Packing:
Alloy:
MOQ:
Usage:
- Supply Ability:
100000 Metric Ton/Metric Tons per Week
Packaging Details
- 2) The packaging can be eye to sky or eye to wall based on the customer's requirement
- 3) 16-24MT can be located into 20FCL, the sea freight rate is much cheaper than 40FCL.”>1) Standard seaworthy export packaging. Wooden pallets with plastics protection for the coil and sheet.
- 2) The packaging can be eye to sky or eye to wall based on the customer's requirement
- 3) 16-24MT can be located into 20FCL, the sea freight rate is much cheaper than 40FCL.
Picture Example:
Lead Time :
Quantity(Kilograms) 1 – 5000 5001 – 20000 >20000 Est. Time(days) 7 14 To be negotiated
The 3003 aluminum sheet is a commonly used product in the aluminum-manganese alloy series. Due to its manganese alloy content, this product has excellent anti-rust properties, also known as rust-proof aluminum plate, so it is often used in wet environments such as outer packaging, mechanical parts, refrigerators, air conditioning ventilation ducts. The strength of this alloy is slightly higher than that of industrial pure aluminum, and it cannot be heat-treated. Therefore, the cold working method is used to improve its mechanical properties: it has high plasticity in the annealed state, plasticity is good in semi-cold hardening, and poor plasticity in cold hardening while with good corrosion resistance, good weldability and poor machinability. 3003 aluminum sheets are commonly used in ships, ships, vehicle materials, automotive and aircraft welded parts, pressure vessels requiring strict fire protection, refrigeration equipment, television towers, drilling equipment, transportation equipment, missile components, armor, etc.
GB/T 3190 | Chemical Composition(%) | ||||||||
Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Al | |
1050 | 0.25 | 0.40 | 0.05 | 0.05 | 0.05 | - | 0.05 | 0.03 | 99.50 |
1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | - | 0.05 | 0.03 | 99.60 |
1070 | 0.20 | 0.25 | 0.04 | 0.03 | 0.03 | - | 0.04 | 0.03 | 99.70 |
1100 | 0.98 Si+Fe | 0.05-0.20 | 0.05 | - | - | 0.10 | - | 99.00 | |
3003 | 0.6 | 0.7 | 0.05-0.20 | 1.0-1.5 | - | - | 0.10 | - | |
5052 | 0.25 | 0.40 | 0.10 | 0.10 | 2.2-2.8 | 0.15-0.35 | 0.10 | - | |
5083 | 0.40 | 0.40 | 0.10 | 0.40-0.10 | 4.0-4.9 | 0.05-0.25 | 0.25 | - | |
6061 | 0.40-0.8 | 0.7 | 0.15-0.40 | 0.15 | 0.8-1.2 | 0.04-0.35 | 0.25 | 0.15 | |
7075 | 0.40 | 0.50 | 1.2-2.0 | 0.30 | 2.1-2.9 | 0.18-0.28 | 5.1-6.1 | 0.20 | |
8011 | 0.50-0.9 | 0.6-1.0 | 0.10 | 0.20 | 0.05 | 0.05 | 0.10 | 0.08 |
Grade | Temper | Thickness/mm | Tensile Strength Rm/Mpa | Extension StrengthRp0.2/Mpa | Elongation/% | |
A50mm | A5.65 | |||||
more than | no less than | |||||
3003 | O | 0.20-0.50 | 95-140 | 35 | 15 | - |
0.50-1.50 | 17 | - | ||||
1.50-3.00 | 20 | - | ||||
3.00-6.00 | 23 | - | ||||
6.00-12.50 | 24 | - | ||||
12.50-50.00 | 23 | |||||
H12
| 0.20-0.50 | 120-160 | 90 | 3 | - | |
0.50-1.50 | 4 | |||||
1.50-3.00 | 5 | - | ||||
3.00-6.00 | 6 | |||||
H14
| 0.20-0.50 | 145-195 | 125 | 2 | - | |
0.50-1.50 | 2 | - | ||||
1.50-3.00 | 3 | - | ||||
3.00-6.00 | 4 | - | ||||
H16
| 0.20-0.50 | 170-210 | 150 | 1 | - | |
0.50-1.50 | 2 | - | ||||
1.50-4.00 | 2 | - | ||||
H18 | 0.20-0.50 | 190 | 170 | 1 | - | |
0.50-1.50 | 2 | - | ||||
1.50-4.00 | 3 | - | ||||
H22 | 0.20-0.50 | 120-160 | 80 | 6 | - | |
0.50-1.50 | 7 | - | ||||
1.50-3.00 | 8 | - | ||||
3.00-6.00 | 9 | - | ||||
H24 | 0.20-0.50 | 145-195 | 115 | 4 | - | |
0.50-1.50 | 4 | - | ||||
1.50-3.00 | 5 | - | ||||
3.00-6.00 | 6 | - | ||||
H26
H28
H112
F | 0.20-0.50 | 170-210 | 140 | 2 | - | |
0.50-1.50 | 3 | - | ||||
1.50-4.00 | 3 | - | ||||
0.20-0.50 | 190 | 160 | 3 | |||
0.50-1.50 | 3 | |||||
1.50-3.00 | 2 | |||||
6.00-12.50 | 115 | 70 | 10 | - | ||
12.50-80.00 | 100 | 40 | 18 | |||
- | 2.50-150.00 | - |